Tesla

Cybertruck wrap and PPF guide

The stainless body rewrites the usual protection plan for the Cybertrucks we wrap and film in College Station. Here is what a wrap, PPF and tint each do on a Cybertruck, and what they start at.

Short answer

A Cybertruck has no paint to protect, so clear PPF on the body is optional and a color-change wrap is the most common job. SLEEPR wraps the full stainless body from $3,999, installs colored PPF over it from $7,999, and quotes windshield protection film with the build. Ceramic tint on the glass is the one thing nearly every Cybertruck owner adds, and every film we use is non-metallic so Autopilot and FSD cameras are unaffected.

Key takeaways

  • The body panels are cold-rolled stainless steel with no paint, so clear PPF is not needed on the body the way it is on a painted truck.
  • A full color-change wrap starts at $3,999 and is fully reversible; a matte or satin black wrap is the most requested finish.
  • Colored PPF from $7,999 gives a color change plus a thicker, self-healing layer, which matters if you drive gravel or ranch roads.
  • The windshield is one of the largest single panes of glass we film; windshield protection film is quoted with the rest of the build.
  • Stainless needs a different surface prep than paint before vinyl goes on, and fingerprints and smudges show on bare panels between washes.

Options

Partial or accent wrap

Price it instantly

  • Tonneau cover, roof, sail panels or a two-tone split
  • Same vinyl library as the full wrap
  • Matched to any existing wrap or trim

Get my price

Colored PPF, full body

from $7,999

  • Color-change film with a self-healing top coat
  • Thicker than wrap vinyl; resists chips and scuffs
  • Finish and coverage confirmed at consultation

Scheduled with the quote

Get my price

How it works

  1. 01
    Walk the truck

    We check every panel for dents, scuffs and prior adhesive. Stainless shows a scratch differently than paint, and anything already in the panel is photographed before film goes on.

  2. 02
    Prep the stainless

    Bare stainless carries oil from handling and road film from Highway 6. Panels are degreased and wiped down with alcohol so the vinyl bonds to metal, not to residue.

  3. 03
    Pattern and cut

    The flat panels look easy, but the long sharp edges and the sail panels are where wraps fail. Film is cut oversized and wrapped around the edge of each panel.

  4. 04
    Install

    Vinyl or colored PPF goes on in the climate-controlled bay. A full wrap is normally 3 business days, with a fourth on a truck this size; colored PPF is scheduled with the quote.

  5. 05
    Glass and pickup

    Windshield film and ceramic tint are usually done in the same visit. You get care notes for the first week and a walkthrough of every panel.

What's specific to this vehicle

Body
The exterior panels are cold-rolled stainless steel with no paint and no clear coat. There is nothing for a rock chip to flake, so clear PPF on the body is an aesthetic choice rather than protection. What the panels do pick up are fingerprints, water spots and fine scratches from brush washes, which is why owners who keep the bare look often add a coating and hand-wash it.
Wrap adhesion
Vinyl is engineered for paint. On stainless it needs a cleaner surface and more careful edge work, because the panel edges are sharper and the film has no clear coat to key into. We wrap edges rather than trimming on the face, and we skip the knife on the metal entirely.
Glass
The windshield is one enormous pane, and the wiper is a single long arm. Replacement is expensive and the glass sits at a low angle that catches highway debris. Windshield protection film is the most useful PPF on the truck. The side glass and rear glass take ceramic tint; the front sides stay at 25% VLT or lighter per Texas law.
ADAS
The forward cameras sit in a housing behind the top of the windshield, and more cameras sit around the body for Autopilot and FSD. We use non-metallic ceramic film only and keep the camera housing clear so Autopilot and FSD behave exactly as they did before.
Tonneau and trim
The powered tonneau cover, the sail panels, the door handles and the lower trim can be wrapped on their own for a two-tone truck. Wheel-arch cladding and interior trim pieces can be filmed where owners want them to match.
Coverage
For most owners: a full wrap or colored PPF if you want a color, windshield film regardless, and ceramic tint on every pane. If you are keeping the bare stainless, add windshield film and tint and skip body film.

Pricing

Full color-change wrapAny finish; matte and satin black most commonfrom $3,999
Partial or accent wrapTonneau, roof, sail panels or two-tonePrice it instantly
Colored PPF, full bodyColor change with a self-healing filmfrom $7,999
Windshield protection filmNo camera recalibration requiredPrice it instantly

Why the Cybertruck is a different job

Every other truck in the bay has paint, and paint is what PPF exists to protect. The Cybertruck’s panels are cold-rolled stainless steel with no paint and no clear coat. A rock that would chip a painted fender leaves, at most, a faint mark in the metal. That changes the order of priorities. For most owners the plan is a color (wrap or colored PPF), film on the windshield, and ceramic tint. The rest of our Tesla protection work still applies, just in a different order.

What the stainless does collect is fingerprints, water spots and the fine scratches a brush wash leaves. Owners who keep the bare look usually ask about a coating for that reason; the panels wipe cleaner and spot less.

Wrap, colored PPF or nothing

A vinyl wrap is the fastest route to a color. Matte black and satin black are the most requested stealth looks; gloss white, satin gray, color-shift and camo are the other common picks. The wrap is reversible and comes off stainless cleaner than it comes off paint, because there is no clear coat for the adhesive to lift.

Colored PPF is the heavier option. It is thicker than wrap vinyl, has a self-healing top layer, and holds up better to gravel, brush and the kind of use a truck gets on a lease or a ranch road. It costs more and takes longer. If the truck will spend its life on pavement, vinyl is the better value. If it will see Grimes County caliche, colored PPF earns the difference. The vinyl wrap vs colored PPF page covers the trade in more detail.

Leaving the body bare is a legitimate choice. In that case we recommend only windshield film and tint.

The part that actually needs film

The windshield. It is one of the largest single panes of glass we film, it sits at a low angle, and it is expensive to replace. Windshield protection film absorbs the impact from the gravel that Highway 6 trucks throw, and it does not require any camera recalibration because the camera housing stays uncovered. See windshield protection for how the film is installed and cared for.

Tint

Ceramic tint is the service nearly every Cybertruck gets. The cabin glass area is large, the roof glass runs most of the cabin length, and Texas heat loads it from morning on. We use non-metallic ceramic film only, so the Autopilot and FSD cameras behind the glass are not affected. Front side windows stay at or above 25% VLT to meet Texas law; the rears can go as dark as you want. Pricing is quoted by pane on the window tint page.

Installing on stainless

Vinyl is formulated for paint. On stainless the surface has to be degreased and alcohol-wiped so the film bonds to metal rather than to handling oil and road film. The flat panels are simple; the long sharp edges and the sail panels are where a wrap fails if it is cut on the face. We wrap the film around each edge, and no blade touches the metal. The camo wrap and the custom wraps in our Tesla gallery were done this way in the College Station bay.

If you tell us the finish you want and whether the truck sees gravel, we can quote the wrap, film and tint together.

Questions

How much does it cost to wrap a Cybertruck?

A full color-change wrap starts at $3,999. Partial and accent wraps are quoted by panel. Colored PPF over the whole body starts at $7,999.

Does a Cybertruck need PPF?

Not on the body. There is no paint to chip. The windshield is the exception; windshield protection film is the one film almost every Cybertruck should have. Colored PPF is a color-change option, not a necessity.

Can the wrap be removed later?

Yes. Vinyl comes off stainless cleanly when it is removed with heat. There is no clear coat underneath to lift, which is one advantage over wrapping a painted truck.

What is the most popular Cybertruck finish?

Matte black and satin black are the most requested stealth looks. Gloss white, satin gray, color-shift and camo prints are the other common choices; the camo wrap in our gallery was done here.

Will tint affect Autopilot or FSD on a Cybertruck?

No. We use non-metallic ceramic film and keep the camera housing at the top of the windshield uncovered. Metallic film is the kind that interferes with sensors, and we do not install it on any Tesla.

How long does a Cybertruck wrap take?

Plan on 3 to 4 business days for a full wrap; a partial is scheduled with the quote. Colored PPF is scheduled with the quote. Tint and windshield film fit into the same visit.

Does the stainless need prep before wrapping?

Yes, and it is different from paint. The panels are degreased and alcohol-wiped so the film bonds to clean metal. Wrap failures on Cybertrucks almost always trace back to skipped prep or edges cut on the face.

Wrap or colored PPF on a Cybertruck?

If the truck will spend its life on pavement, vinyl is the better value. If it will see gravel, brush or ranch roads, colored PPF from $7,999 is thicker, self-healing and earns the difference.

Can I keep the bare stainless?

Yes, that is a legitimate choice, and then we recommend only windshield film and tint. Owners who keep the bare look often ask about a coating, because the panels wipe cleaner and spot less.

Can I wrap just the tonneau or sail panels?

Yes. The powered tonneau cover, the sail panels, the door handles and the lower trim can be wrapped on their own for a two-tone truck. Partial and accent wraps are quoted by panel.

What tint is legal on a Cybertruck?

The front side windows stay at 25% VLT or lighter per Texas law, and the rear glass can go as dark as you want. Every film we install on it is non-metallic ceramic.

Get my pricePriced for your vehicle in the shop, before you book.

Ready to protect your vehicle?

Slots fill fast — most tint and impact-zone PPF are same day, full wraps in three days.